Description
This is a 60 MHz bandwidth with selectable 20 MHz bandwidth two channel digitizing oscilloscope. The instrument includes control via an IEEE-488 (GP-IB) bus.
Note: sixteen of these instruments were purchased courtesy of a grant from Nortel.
| Digitizers | 8 bit resolution |
|---|---|
| Volts/Div Range | 2 mV/div to 5 V/div at input BNC |
| Position Range | 2 mV/div to 200 mV/div, ±2 V [> 200 mV/div to 5 V/div, ±50 V] |
| Lower Frequency Limit, AC Coupled | <= 10 Hz at BNC <= 1 Hz when using a 10X passive probe |
| Rise Time at BNC | < 5.8 ns |
| DC Gain Accuracy | ±3 % for sample or average acquisition mode |
| DC Measurement Accuracy | ±[3 % x |reading + (position x volts/div) | + (0.1 div x volts/div)] |
| Sample rate Range | 50 S/s to 1 GS/s |
| SEC/DIV Range | 5 ns/div to 5 s/div, in a 1, 2.5, 5 sequence |
| Sample Rate and Delay Time Accuracy | ±100 ppm over any >= 1 ms time interval |
| Internal Trigger Level Accuracy | ±0.2 div x volts/div within ±4 divisions from center screen |
| External Trigger Level Accuracy | ±(6 % o f settings + 40 mV) |
Click here to go to the top of this page.
Click here to go to the top of this page.