Click here to go to UPSCALE home page.
Click here to go to I Year Lab home page.
You can jump directly to a section of this specification sheet by selecting an item below and clicking the left button.
CALIPERS (Vernier Caliper)
Manufacturer: Various
Cost: ~$30 (1982)
Description
A versatile caliper for precise measurement of
interior and exterior dimensions of objects. Inch and
centimeter scales are provided, which may be precisely read
by means of a vernier scale (see VERNIER sheet in "Notes to
students" for instructions).
Specifications
range | 0 - 18 cm |
sensitivity | 0.002 cm |
accuracy | not specified. |
---|
Click here to go to the top of this page.
Operating Instructions
- Loosen both the "lock" and the "fine adjust lock" and
close the caliper so as to check the zero length
reading. If it is not zero all readings will have to
be corrected appropriately. Also check the measuring
edges for coincidence.
- Gently apply the caliper to the object, and tighten the
"fine adjust lock".
- Move the "fine adjust" very gently until the object
snugly fits in the caliper jaws. Do not over-tighten.
- Read the scale in cm.
Click here to go to the top of this page.
keywords: distance measurement device, length measurement device, width measurement device, vernier.
Document created Circa 1982. Original author: Unknown.
Last updated 06/27/96. Revised by David Harrison.